To export data from 352 SoftCorr III to Excel, perform the following practice:

1. With ASTM.dat open, and Data Graph selected, choose Edit>Copy Data.  Copying data with the Data Table selected copies the raw data as collected from the system (remember, the 352 software reverses the polarity of the current before graphing it so that it will agree with that convention used by corrosion engineers/scientists)
2. Open up the Excel file, select columns for pasting, and select Edit>Paste

At this point the data is text, and needs to be converted to two separate columns

1. Select Data>Text to Columns..., and convert data to two separate columns by choosing Delimited>Space>Finish

Notice that the X values (current) are the actual exponent values for the current.  If this is not suitable, you can convert the graph style to E vs. I in 352 before copying data.  Choose View>Style>E vs. I to change this format.  After changing the forman the current will be displayed in whole numbers.