 |
 |
![]() 
There are four VersaSTAT systems available, each of which include VersaStudio software:
- VersaSTAT100 basic DC voltammetry techniques
- VersaSTAT200 advanced DC voltammetry techniques
- VersaSTAT300 DC corrosion techniques
- VersaSTAT400 complete DC voltammetry and corrosion techniques
The complete VersaStudio software provides full access to the capabilities of the VersaSTAT series of instruments, including the high current option and power booster when present. Various systems combining hardware and the VersaStudio software are provided to focus on the particular application areas or to minimize cost.
Systems may be upgraded at any time as budget becomes available or as requirements change. An impressive list of corrosion and electrochemical experiment types are provided that can be run individually or combined in powerful experiment sequences:
| Open Circuit |
Square Wave Voltammetry |
Potentiostat EIS |
| Linear Scan Voltammetry |
Differential Pulse Voltammetry |
Galvanostatic EIS |
| Cyclic Voltammetry (single) |
Normal Pulse Voltammetry |
Loop |
| Cyclic Voltammetry (multiple cycles) |
Reverse Normal Pulse Voltammetry |
Time Delay |
| Staircase Linear Scan Voltammetry |
Zero Resistance Ammeter (ZRA) |
Message Prompt |
| Staircase Cyclic Voltammetry (single) |
Galvanic Corrosion |
Measure OC |
| Staircase Cyclic Voltammetry (multiple) |
Cyclic Polarization |
Auxiliary Interface |
| Chronoamperometry |
Linear Polarization |
Run External Application |
| Chronopotentiometry |
Tafel |
DAC Output Control |
| Chronocoulometry |
Potentiostatic |
Condition |
| Fast Potential Pulses |
Potentiodynamic |
Deposition |
| Fast Galvanic Pulses |
Galvanostatic |
Equilibration |
| Recurrent Potential Pulses |
Galvanodynamic |
Purge |
| Recurrent Galvanic Pulses |
Dynamic iR |
iR Determination |
The VersaSTAT software modules make use of core facilities that provide everything you would expect from a high quality electrochemical system:
- Flexible experiment setup that can automatically sequence the potentiostatic, galvanostatic, and impedance capabilities of the VersaSTAT hardware
- Result displays and overlays in a wide variety of axis formats for DC and EIS experiments
- Voltage and current vs. time strip chart display
- Full storage and retrieval facilities allow straight-forward comparison of current and stored data
- DC data analysis and fitting routines including line, Tafel, and polarization resistance (Rp)
- Data Output in text format into other applications for further analysis and report generation
- Line and circle fitting for basic EIS data analysis, for estimation of cell parameters such as solution resistance and polarization resistance
- Comprehensive EIS analysis and fitting techniques are available by importing data into the popular ZSimpWin option package. A range of equivalent circuits are pre-programmed in ZSimpWin and additional circuits may easily be added as required
The software provides a comprehensive range of facilities, yet is incredibly easy to use. Basic experiments such as cyclic voltammetry are up and running with surprisingly few menu entries. This makes the system very easy for novice users.
Using the carefully designed menus, even complicated experimental sequences, (e.g. battery charge / pulse discharge / EIS or multi-step electrochemical applications), are simple and logical to set up.
Take a Look at VersaStudio.
Click here to download VersaStudio
|
|
 |
 |
|
|
 |
|
|
|